How do you program dish remote to turn up the volume on tv on Emerson plasma?

Answer 1

You can program your DISH remote to work on your Emerson TV not just the input button. Here are the codes for your Emerson TV: 632, 652, 679, 682, 692, 661, 662, 657, 658, 525, 534, 536, 590, and 627.

Remotes: Basic (Television Only)

1. Turn the Television On.
2. Press and hold the clear TV button for three seconds until the LED flashes.
3. Enter the three-digit code using the buttons on the number pad.
4. Press #. Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Answer 2

Here are the codes associated with Emerson TVs: 572,846,738,777,733,618,573,683, or 832.

Here are instructions on how to program the remote to your TV.

Address Remote to TV/Other Devices

1. While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
2. Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up

1. Press the Pound (#) button - The mode button you are programming should flash three times
2. Press the large, red POWER button - The device should turn off

Answer 3

To program the remote, I have listed the steps, and a list of codes that are most likely to work below.

Codes: 733, 632, 569, 214, 489, 222

Press and hold the clear TV button until all mode lights light up. Release and TV light will be blinking. Enter the code and press #. The TV button should flash 3 times. Try functions (Volume, Power, etc..) and see if it is working. If no function, repeat these steps with another code.