answersLogoWhite

0

There are two screw on the bottom of the light fixture take them out and you should be able to slide the light encasement down and off. The bulb itself will unscrew from the encasement.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where is the fuse for the left low beam headlight for a toyota celica gts 01?

If you only have one headlight out, its probably the bulb, not the fuse. See sources and related links below for headlight information.


How do you replace a headlight on a 01 Chevy Cavalier?

2001 Chevrolet Cavalier headlight bulb lamp replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).


How many gears does a 01 Yamaha blaster have?

6 gears


How do you change a back blinker bulb in 01 Pontiac Aztec?

Go to Autozone. When you purchase the bulbs they will put them in for free.


How fast will a 01 200 stock blaster go?

kno 1 nos


How do you replace the headlight bulb located on a 2001 Pontiac Grand Am GT?

In order to replace the headlight bulb on a 99-01 ga gt the ram air cover needs to be removed. After doing that, locate two metal "L" shaped clips from the adjusting brackets. No tools are really necessary, however it is easier if you use some needle-nose pliers. Also, when replacing the bulb be careful not to drop the metal piece inside the headlights, man that thing is HARD to put back in! Good luck cause GM pulled a real job on these!


Change light bulb on 01 CRV?

Which bulb?


How do you change a headlamp on a Benz ml?

It's very easy… This is based on the 01 ML-320. Open the hood and there is a black plastic cover behind the headlight. It has one or two snap tabs that hold it in place. Remove the cover and you will be looking at the back of the headlight. There is a metal clamp that holds the bulb in the headlight assembly it unsnaps in an obvious way. After it is released the bulb can be pulled back out of the headlight assembly.(Pay attention to which way the tab on the back of the bulb was situated. It can really only go in one way… The clamp won't close if it's wrong.)Then reverse order to install the new one. BE CAREFUL NOT TO TOUCH THE GLASS ON THE BULB as it WILL cause it to fail prematurely.


How do you turn off check engine light on 01 civic?

Solve the problem. Remove bulb. Put a small piece of electrical tape over bulb. Any of those should do it.


How do you replace the daytime running light bulbs on 01 Suburban?

This is the method I used on my 2001 Suburban. It should work on similar suburban designs (2000-2006, but I have not verified that.)Open the hood, then remove the headlight. To remove the headlight, there are 2 "L" shaped brackets, one on the left, one on the right. Rotate them both toward the front of the car, then pick them straight up and the headlight will come out. Now, you have to fiddle with the daytime running light socket a bit. You have to twist it to the right and it will pop out. However, to twist it, there is a plastic piece on it you have to depress to get it out of the way of a 'stop' that protrudes from the daytime running light housing. Take out the old bulb, put in the new one, slide the bulb back in at the angle you took it out, then twist it back and it will snap in place. (The snap is the sound of that plastic piece hitting the gray 'stop'.) Put the headlight back in and you're done.


How do you replace bulb BMW 530i 01?

To replace the bulb in a 2001 BMW 530i, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, taking care not to touch the glass with your fingers, as oil can reduce its lifespan. Finally, reinsert the socket into the assembly and secure it by twisting it clockwise.


How do you change the headlight bulbs on a 01 ford ranger?

LIFT THE CLIPS AND PULL IT OUT