To put the top down on a 1994 Corvette Convertible, first ensure the car is parked on a flat surface with the engine running. Release the two latches located above the windshield, then pull the top back gently. Use the switch located on the center console to operate the power top, and carefully guide it down until it's fully retracted. Finally, secure the top in its storage position and ensure the latches are properly secured when the top is up.
Yes, but you have to do it manualy because it doesn't have a power top.
How do you put the top down on a 1998 Chevrolet Convertible
put it down
I dont believe there is any adjustment a late model corvette. I do know with any convertible they will shrink if left down for a while and expand in high heat while up. put your top up in the evenings if your having problems latching it in the morning. if it puffs up in 95 + degrees it will relax when it cools.
== ==
How do you put the top down on a Mercedes slk230? there should be a button on the middle console that operate the convertible, that's how i let my convertible down on my 1999 slk kompressor
I had the same problem with my 1994 Corvette Convertible. I drilled a small hole on the door edge where there is a square of fiberglass that is very thick. I simply lined up the panel and put in a small black head screw. The panel must be hanging tight on the window edge and the bottom tight before you do this. It worked for me......
Type your answer here...
If one wants to use convertible top fluid on a 1992 Lebaron convertible, one should first put the fluid on a rag and begin to wipe down the top. It is important that one spread the fluid evenly on the top.
Try disconnecting the vacumn hose under the hood and gently push down on the lamp door.
IT IS PART OF THE HANDLE. aFTER THE HANDLE IS IS LOCKED DOWN YOU PUSH OR PULL FOR UP AND DOWN.
Why would you want to put a '76 vintage small block into your 1994 Corvette to replace the LT1? That's craziness but it can certainly be done. Now, if you're asking whether you can install a 1994 LT1 into a '76, your answer is ABSOLUTELY YES. LT1 into older Corvette is a very common swap. Good luck with it.