Chiltons Book #26666
Fuel Tank
Tank assembly
Removal & Installation
> Some vehicles are equipped with two fuel tanks, one located in the center of the vehicle and one in the rear.
2. Disconnect the negative battery cable.
To Install:
_____________________________________________________________
Electric Fuel Pump
Removal & Installation
1. Disconnect the negative battery cable.
2. Relieve the fuel pressure.
3. Raise and support the vehicle.
4. Remove the fuel tank; refer to the procedure outlined in this section.
5. Remove the fuel pump retaining bolts.
6. Remove the fuel pump.
To Install:
7. Thoroughly clean the fuel pump mounting flange.
8. Install a new gasket and place the pump into the tank.
9. Ensure that the fuel tubes face toward the fuel rail and tighten the retaining bolts to 80-107 inch lbs. (9-12 Nm).
10. Install the tank as outlined in this section.
11. Tighten the fuel tank bolts to 66-91 inch lbs. (7.6-10.4 Nm).
12. Tighten the fuel tank strap bolts to 22-30 ft. lbs. (29.7-40.7 Nm)
13. Tighten the skid plate bolts to 9.3-12.7 ft. lbs. (12.7-17.3 Nm)
14. Connect the negative battery cable.
you need two special quick release line tools and they don't always come off easy.gm Jim
With fuel line quick release tools available from your local auto parts store.
What is the fuel capacity on a Ford F150
1997 ford f150 fuel pressure specs
There are images available online to help you see where the Fuel reset switch on a 1986 Ford F150 is.
The 1986 ford f150 has two fuel pumps. There is one pump mounted inside of each fuel tank.
find the schrader valve on the fuel rail depress the stem and it should release the pressure from the fuel system
Yes.
Remove fuel tank
92 f150 fuel shut off switch located
With a fuel pressure gauge connected to the fuel rail.
In the gas tank