answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2011-09-12 01:18:23

You need a gunsmith, and not WikiAnswers for this one. Sorry-

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


NO!!! A 12 gauge shotgun takes only 12 gauge shells. A 20 gauge shell would fall into the barrel and get stuck about half way to the muzzle. You would be in for a nasty surprise when you put a 12 gauge shell behind it and pulled the trigger!!!




My historical references indicate that the Browning light weight (light 12,or light 20) had the gold plated trigger from the time of there introduction.This would be 1947 for the 12 gauge model,and 1958 for the 20 gauge model.


12 Gauge is thicker then the 20 gauge.




Assuming you have an Auto-5, anywhere from $400-$1500. Have it properly identified and evaluated.


a 20 gauge is a type of many shotguns but it is smaller than a 12 gauge but bigger that a 410. a 20 gauge is a good shotgun for all ages.


20 gauge steel is about 75% the thickness of 18 gauge steel.


20 gauge is equel to 0.8mm


18 gauge is thicker than 20 gauge. 18 gauge is 1.27 mm thick while 20 gauge is .953 mm thick.


Check gunsamerica.com, gunbroker.com or auctionarms.com the value varies according to its condition.



20 gauge is thicker (the lower the number, the thicker the steel).


MAKE SUE IT IS EMPTY FIRST knock the pins out the side of action, drop out trigger group. remove the mag cap and the barrel will come off. Leaves the bolt open to be cleaned. If you need to remove the bolt, hold the mag stop in bottom of action and it slides out the from with the slide. Reassemble the same way.






I saw that a double trigger is worth $699.00. The question is, how many are out there for sale. I do have the single gold trigger one. -Larry- Buffalo N.Y.


The metal of the 17 gauge waste drain is thicker than the 20 gauge.


Yes the stock on a Winchester Model 12 16 gauge is the same as a 20 gauge. 16 gauge,20 gauge, and 28 gauge are all the same for the Winchester Model 12. Thanks, Tim


Is there a model # on the bottom of the trigger guard. Is it ingraved? A sidelock? What gauge is it? 12 or 20 gauge? Call Joe at area code 832 and # 721-5900 for help.




Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.