i was never know what is the answer ,
The 2000 Chevrolet Impala parking brake will have an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
You may be low on brake fluid or the parking brake linkage needs adjusting.
my parking brake release did not take off the parking brake on my 2001 chevy s10? is there a way to disengage it?
The 1998 Chevy Corvette parking brake can be adjusted with the parking brake adjustment bolt. You can also adjust the parking brake cable.
The 2001 Chevy Cavalier parking brake has an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
The parking brake on these vehicles are basically self-adjusting. Fully apply and release the hand parking brake lever 4-6 times to self-adjust.
To release the parking brake, hold the regular brake pedal down with your right foot. Push down momentarily on the parking brake pedal with your left foot until you feel the pedal release. If the parking brake is not released when you began drive, the brake system warning light comes on and s chime sounds as a warning that the parking brake is still on.Manual Book page 2-28
How do you adjust the parking brake on a1994 Lumina?
press the pedal down as far as you can and as it goes up...it should release it...
The park release lever is right above the parking brake. I need to push in on my parking brake a little and then pull on the release for it to release it.
Turn the car off. push on the parking brake 1 or 2 clicks turn car on. the lights will not come on