if don't no how don't try it
Under the seats
pull lever in the middle of the seats from luggage compartment
For h20a engine spark plug gap , 0.7mm to 0.8mm
I have a 1995 Suzuki Virara 2 Ltr V6 5 Door and the fuel filter is at the back of the car on the drivers side in front of fuel tank. hope this helps.
The headlight relay on a 1995 Suzuki Vitara is typically located in the fuse box, which is usually found beneath the dashboard on the driver's side or under the hood. To find it, refer to the fuse box cover for a diagram that indicates the specific location of the headlight relay. If you are having trouble locating it, consulting the vehicle's service manual can provide additional guidance.
is this a question.? do you want to buy one. find one on car. find one in car. do you what to test it. did i prime your pump.... hahahahaha
You have to put your fingers in your tight butt hole and play with your penis and moan as load as possible. 8====D
The idler pulley from a 1995 Chevy Geo Tracker is unlikely to fit a 2001 Suzuki Vitara, as they are different vehicles with distinct engine designs and specifications. While both vehicles share some components due to their shared platform, it’s essential to consult part numbers or a mechanic for compatibility. Always check the specific models and engine configurations to ensure proper fitment.
To change the door locks on a 1995 Suzuki Vitara, start by removing the interior door panel using a screwdriver to take out screws and clips. Once the panel is off, disconnect the door lock mechanism from the handle and any wiring harnesses. Replace the old lock cylinder with the new one, reattach the mechanism, and then carefully reassemble the door panel. Finally, test the new lock to ensure it functions properly.
Just starting things off. The filter is attached to and located in front of the fuel tank on the drivers side (RHS). Nuts are tight and need to be cracked.
Remove the water pump belt on your 1995 Suzuki 1.6 liter engine. Remove the water hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
depressurize fuel system. loosen gas cap. drop shield pull hoses drop tank pull pump rack replace pump reverse above