Remove the bottom first. Push down and towards the back of the car at the front of the seat and it will pop out. They are usually NOT easy to pop out. Once the bottom is out, there are two screws at the bottom of the seat back. Remove those and slide the back up to unhook the top of the seat back from the body of the car.
How do you replace gas tank straps for 1967 chevelle Malibu
you don't.
First, unplug it from the back. Then remove the screws in the chrome ring. You will see a ring around the outer lip of the headlight. This will have screws on it. 3, I think. Anyway, remove these. Now, you will see screws with springs by them. These are for aiming purposes, only.
Removing a Nuetral Safety switch on a chevelle is actually quite easy. You take out four bolts and remove the gear shifter and then remove three more screws and unplug a pigtail and the safety switch comes right off.
On the firewall, passenger side. You'll have to remove the fender to get to it.
they pull upward off the spline posts.
in the back under the trunk.
should be 2 phillips head screws holding it in.
Hammer and crow bar, guaranteed.
That requires a special puller to get it off. It is pressed on.
remove the center padded section on the steering wheel and you will see a large nut holding the wheel on, loosen the and take it off and then you will need a wheel puller to pull the wheel back off of the splines to take it off.
They just pull off.... NOT very easily though. Chances are, they will be loose when you put them back on (if you reuse them) so you'll need a little glue when you put them back on. They are simply pressed on to the levers.