Place a jack under tank to support the tank. Remove fuel tank straps. Slowly lower tank. When able to reach in, diconnect all electric lines and fuel lines. Continue to lower tank and remove.
Helpful hint, hope the tank is nearly empty.
Some additional info: If your suburban has the optional shield package, then you 1st must remove the fuel tank shield sitting underneath/around the tank bottom. There are 4 bolts that hold the front of the shroud and 3 or 4 that hold the rear. They thread into captive nuts inside the relevant frame members (they are long - about 6"). Once removed, drop the shround and now you can remove the straps etc.
Please disconnect the negative terminal from the battery before you proceed with any of the above.
It is in the gas tank. have to remove tank to service it.
It has a 42 Gallon tank. It has a 42 Gallon tank.
The 2003 Chevrolet Suburban fuel filter is located inside of the gas tank. You will to remove the gas tank in order to change the fuel filter.
It is inside of the fuel tank. You will have to remove the gas tank to service the fuel pump.
It is inside of the fuel tank. You will need to remove the gas tank to service it.
Unfortunately you have to remove the tank, siphon as much as you can and then remove the tank.
Fuel filter in in gas tank and is part of fuel pump assembly. You will have to drop tank
It has an electric fuel pump inside of the fuel tank. You have to remove the tank to get the pump out of the top of it.
I think you have to remove the drive shaft, remove the straps to the tank and drop it, of course disconnect the battery, and remove as much gas as possible.
in the gas tank. remove the all of the rear seats and there will be a plate you remove to access the fuel pump in the gas tank
It is important to know the gas tank size of a vehicle being driven. The 1996 Suburban has a gas tank with the fuel capacity of 42.0 gallons.
The gas tank on the 2011 Chevrolet Suburban holds 31.0 gal..