There is one bolt on the top and three nuts behind the headlight that have to be removed.
You have to remove the whole lense assembly. There are 3 nuts on the back, and 1 bolt on the top.
You must remove the 3 bolts on the opper part of the headlight housing and then remove the entire housing. You can then reach the bulb connection
for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan? for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
Remove the retaining screws from the headlight assembly. Remove the wiring harness from the back of the headlight. The headlight will come out. Reverse the process to install the new headlight.
To remove the headlight unit from Vauxhall Vectra SRI 1999, first remove the cover and disconnect the wires by pulling outwards. Push each side of the pin outwards until it releases. Then remove the headlight unit.
What do you mean by headlight cover?What are you trying to do?JW
Look on the rear of radiator about 1/3 down from the top actually on the 1999 caravan with the 2.4 liter, it is below the drivers side headlight, you will need to remove the headlight assembly and remove the plastic cover below it. you will see the relay riveted to the body structure. drill out the rivets and replace the relay with the new one. you will need to replace the rivets as well. i just did this today so it is fresh in my mind. good luck.
Remove the headlight, reach in, and twist.
I detail used cars at local dealerships and I have restored many Caravan headlight lenses. I use a product called Crystalenz, it works great and is really easy to use. You DO NOT have to replace the lenses. Check out their website www.crystalenz.com for more info. for removal, see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
Remove fuel tank
Halogen makes real nice bulbs, they r bright, and long lasting
Headlight cover? The headlight can be removed by first removing the bumper cover. THen all the bolt that attach the headlight to the vehicle will be exposed. The "cover" is glued to the headlight housing.