remove the winshield warher tank. loosen the bolt under the pasanger side fender wall so that you can push it down a little. now loosen the three bolts on the firewll of the car where the blower is located and remove the hose above the blower so that you can pull out the blower. use the hose on the new blower and replace blower. screw on bolts and replace washer tank and your done.
Remove the water from your 1998 Chevy Camaro cooling system. Remove the water supply hoses from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Drain the water from your 1998 Chevy Astro cooling system. Remove the water supply hoses from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Remove the water supply hoses to your 1998 Chevy Lumina heater core. Remove the heater core retaining bolts. Reverse the procedure to install the new heater core.
You will need to remove the water supply hoses from your 1998 Oldsmobile Intrigue heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
drain coolant, disconect heater hose's, remove glove box, remove heater core cover, remove heater core. reverse order to reinstall.
Remove the dash!
You do not have to remove the dash. You do however have to remove enough of the ductwork to allow access to the heater core. This is almost never an easy job and as I have not replaced one on a Navigator, I cannot tell you exactly what to remove. Just remove what is necessary to get to the core. This is why the Pros charge so much to replace a heater core. Just remember exactly how the parts cam off and how they go back on. Good Luck.
To replace the heater core on a 1989 Lincoln Mark VII, first, disconnect the battery and drain the coolant from the radiator. Remove the dashboard and the center console to access the heater box. Disconnect the heater hoses from the core, unbolt the heater box, and carefully remove the old heater core. Install the new heater core, reassemble the heater box, reconnect the hoses, and put the dashboard back in place before refilling the coolant and reconnecting the battery.
How to replace heater core in a 97 Lincoln Town Car
How to I remove the heater core hose from my 1998 Mazda MPV from the motor. The hose is hidden from view. Can't get a tool or my hands inside the small space to remove the clip. Can you help me?
you should be able to get at heater core just by removing glove box.no need to remove all the dash Is there any instructions on how to do this?
the heater core is located behind the instrument panel, you have to remove it and place it on the seat. there are 2 covers that you have to remove before you see the heater core. remove the evaporator case assembly and then remove the vacuum source line from heater core tube seal, remove seal form heater core tubes, remove three screws retaining blend door actuator to evaporator case and remove actuator from the case. remove the access cover and the seal and you should see the heater core with the tubes sticking out, the rest is history, take out the screws and lift out the core along with the seal from the case.