answersLogoWhite

0

You squeeze the clamp with a pliers.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How do you remove the upper radiator hose on a Chrysler Town and Country. It is tucked up under the front frame?

Remove the upper grill plate to access hose clamp on radiator


How do I remove or change a collapsed PCV hose on a 2000 Ford Focus ZTS there is a clamp that I cannot get off.?

To remove a stubborn clamp on a collapsed PCV hose on a 2000 Ford Focus ZTS, cut the hose lengthwise, being careful to get part of the cut under the clamp. Then replace with a new hose and clamp.


What side of the thermostat goes to the hose in a Chrysler Pacifica?

The spring side goes towards the engine, so the other side goes to the hose.


Where is thermostat 2005 Chrysler pacifica 3.5?

Under the housing where the lower radiator hose hooks to the engine.


How can I change a radiator hose leak on a Mazda mpv 2002?

The radiator hoses are held in place with a clamp. The clamp goes around the hose and can be tighten with a screwdriver. Loosen the clamp on each end of the radiator hose to remove the hose.


Where is the thermostat on a 2004 Chrysler Pacifica?

3.5L, under the housing where the lower radiator hose hooks to. 3.8L, under the housing where the upper radiator hose hooks to.


How do you install a power steering hose in a 1987 Chevy Celebrity?

If it is the pressure line use the appropriate flare nut wrench to loosen and remove the flare fittings, then pull the old hose out and install the new hose. The return hose often uses a hose clamp, loosen the clamp enough to remove the hose then install the new hose and tighten the clamps.


Where is the primary drain plug on a Harley Sportster?

On a 1986-2003 there is a drain hose. Look under the motor and there is a rubber hose with a worm clamp on it, it attaches to a bung on the frame. Loosen the clamp and remove the hose from the bung.


Do you have to take out the engine to fix a radiator hose in Chrysler lebaron?

No, you do not have to remove the engine to replace a radiator hose.No, you do not have to remove the engine to replace a radiator hose.


Where is the thermostat on a 2004 Chrysler pacifica 3.5?

It is under the housing where the lower radiator hose hooks to on the engine.It is under the housing where the lower radiator hose hooks to on the engine.


Where is the oil drain plug on a '92 Lowrider?

The drain is located behind the left plastic side cover. It is a hose secured in the upright position by a squeeze clamp. Remove the hose by squeezing and lowering the clamp, and pulling the hose off of the plug.


How do you change the PCV valve on a 2007 chrysler pacifica?

To change the PCV valve on a 2007 Chrysler Pacifica, first, ensure the engine is cool and disconnect the negative battery terminal. Locate the PCV valve, which is typically found on the valve cover or near the intake manifold, and remove the vacuum hose attached to it. Twist and pull the old PCV valve out of its socket, then insert the new valve and reattach the vacuum hose. Finally, reconnect the battery terminal and start the engine to check for proper operation.