The radiator is held in by a couple screws. Just loosen the fan shroud (4 screws), remove your hoses and lines, and lift it out.
Radiator. Remove the cap and add coolant there.
Remove the wiring harness from the back of your 1996 Dodge Ram 1500 alternator. Remove the belt from the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
On the radiator...
first, remove the old thermostat, then...........................install the new one
yes you can
Remove the water supply hoses from your 2002 Dodge Ram 1500 heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
To change the radiator on a 2004 Dodge Ram 1500, first, ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant by removing the drain plug or lower radiator hose, and disconnect all necessary hoses and the transmission cooler lines. Remove the mounting bolts and lift out the old radiator, then install the new one by reversing the process, ensuring all connections are secure and refilling the coolant. Finally, check for leaks and reconnect the battery.
The radiator plug for a 2006 Dodge Ram 1500 is located on the bottom of the radiator on the right side. It is used to drain the coolant during flushes and fluid changes.
Disconnect the battery. Using a clutch fan tool, hold the clutch to loosen and remove it. Remove the fan shroud. Drain the radiator. Remove the water pump belt, then the pump. Install the pump and reverse the process to finish the process.
Remove the wiring harness from the back of your 1995 Dodge Ram horn. Remove the horn retaining bolts. Reverse the process to install the new horn.
No the 1999 and 2002 1500's are different body styles.
It is on the lower driver side of the radiator.