Want this question answered?
To replace a cabinet hinge, you must first remove the screws that attach to the door with either a screwdriver or a drill with screw bit. Next you want to remove the cabinet door. Once you have removed the door, remove the hinge from the cabinet. You can then attach a new hinge. A nice tip is to have a partner hold the door while you screw the hinge back in place.
To remove a door panel from a Renault Clio all the mounting screws need to come off. After all screws have been removed the door panel can be pulled off.
Have to remove the door, then remove pins and bushings
unscrew it
support the door then remove the hinge to door bolts and lift door off.
Buy a hinge pin and bushing kit then rebuild the hinge on the vehicle and avoid trying to remove the hinge off the vehicle.
Open door look at the hinge remove two pins holding it on and remove door place it on ground, pick up new door put pins back onto the hinge well holding door and you should be done.
You do not remove the pin. Remove the bolts holding the entire hinge from the door. You need a helper to do this, and will need help aligning the new door. Mark the location of the old hinge with a marker around the outer edge of the hinge and replace it as close as possible in the exact same location.
you have to lift the door up and use a hammer to hit it
With your mouth.
your gonna need a m8... a jack and maybe some stands.. door on the conv is heavy.. remove the hinge bolts or knockout the hinge pins.. .. tis not rocket surgey..
to remove the doors you un-bolt the door then you lift the door up and off of the hinge.