1. remove thePhilip's head screw in the door handle 2. remove the plastic covers over the screws on the armrest with a small flat blade screwdriver 3. remove the two Philip's head screws in the armrest 4. push the door handle forward (towards the windshield) to remove it from the door (it still will be connected to the actuator rod) but Will be loose enough for #8 5. pop all of the plastic rivets around the front, back and bottom of the door panel with your fingers or with a removal tool (recommended) 6. pop the front of the window/door lock panel up and pull it out 7. unplug the connectors for the window and door lock controls 8. lift up on door panel (it is shaped like an upside down J) and feed the door handle through the hole and it will freely pull away from the door
how do you remove the door panel on a 2001 dodge stratus?--2 door
How do you remove the inside door panel of a 2001 ford f150.
Call an Auto body guy
Type your answer here... how do you remove passenger door panel on 2001 mercury marquis to replace door lock.,
The 2001 Chevrolet Tahoe inside door panel is held in place with eight retaining clips. Pry outward on each retaining clip to remove the door panel.
How do you remove and install front door panel 1985 Nissan Sunny
The 2001 Chrysler 300 rear door panel is held in place by eight retaining clips. Pry outward on each retaining clip to remove the door panel.
The door panel on a 1996 Toyota Tacoma is held in place by several screws on the inside of the door. When these are removed, the panel can be lifted off.
remove the door panel
To remove the driver's side door panel on a 2001 Holden Astra, first remove the covers for the speakers and any light lenses in the door. Then remove the door panel by inserting a screwdriver in the sides to loosen the clips.
Removing the door panels from a 2001 Nissan Frontier is very simple. The door panel is held in place by a few screws only. Remove the screws and pull on the panel gently to remove it.
Using a screwdriver remove the screws and all of the clips in the door panel, and pull the panel away from the frame gently. Remove any wiring connectors, and pull the panel off the door frame.