I recently had a ceiling sprayed and the foam got on everything. Since we are building, I needed to get the foam off of the studs. I used a paint scraper and it worked perfectly. You can pick up a scraper at any store that sells paint. Hope this helps.
Spray contact adhesive will do it.
spray it with perfume
To effectively remove dried wood glue from wood, you can use a scraper or sandpaper to gently scrape or sand the glue off the surface. You can also try using a heat gun to soften the glue before scraping it off. Be careful not to damage the wood while removing the glue.
Without knowing what kind of foam, Try 3M contact adheasive on a test piece, follow directions. A polyurethane glue, like Gorilla Glue, is your best bet. It doesn't dissolve foams, and it will adhere to both the foam and the wood.
I found out that Rubbing alcohol will remove dried latex paint on hard wood floors.
To effectively remove dried Gorilla Glue from wood, you can try using acetone or sandpaper. Acetone can help dissolve the glue, while sandpaper can help physically remove it. Be sure to wear gloves and work in a well-ventilated area when using acetone.
Spray the mark with a lubricant and wipe with a soft cloth.
can you put dried wood into a chipper
To remove spray starch from wood, you can try using a mixture of warm water and mild dish soap applied with a soft cloth. Gently rub the affected area to lift the starch residue. Avoid using abrasive cleaners or excessive scrubbing, as these can damage the wood surface.
Spray the mark with a lubricant and wipe with a soft cloth.
Spray the mark with a lubricant and wipe with a soft cloth.
I don't really know , but I would dry it with a hairdryer , Or just spray perfume onto the wood. =].. :P