First you would need to remove the door panel off of your Nissan Murano. Once the door panel has been removed, you can unplug the mirror from the wire harness.
Next remove the three bolts holding the mirror on.
To remove the mirrors from you Nissan Sentra first remove the inside door panel. Pry the plastic mirror cover off of the mirror. Once this is done remove all of the nuts, bolts, or clips holding the mirror to the door.
I need to remove my glove box on my 2009 Nissan Murano. Where are the glove box pins located?
Any aftermarket shop will be happy to do it for you
Remove the spare key inside and there's a tab that you can pop up with a small screw driver to access the battery.
I have a small dent need to remove it
* Remove the door trim panel * On power mirrors unplug the electrical connector * Remove the triangular cover over the mirror mounting * Remove the bolts and detach the mirror from the door * Installation is the reverse of removal
To install the Mitsubishi Eclipse driver mirror, you will need to remove the interior door panel on the driver's side. Then, remove the cover for the mirror screws. Remove the screws and wiring and remove the old mirror. Replace the wiring and screws as you add the new mirror to the car. Then place the cover and the door panel back on the vehicle.
Remove the inside door panel from your 1991 Chevrolet 1500 pickup truck. Remove the wiring harness from the mirror. Remove the driver side mirror retaining bolts. Reverse the process to install the new driver side mirror.
i would just rip it off
You need to remove the door panel. Remove the wires going to the mirror. Remove the nuts holding the side mirror. Reinstall in reverse order.
hammer
The small plastic cover in the corner of the window is removable. Mirror mounting fasteners and wiring connections can be removed to remove mirror.