mix vinegar with waterand spay tub all over.let sit fora few minutes and wipe off.
I would try to remove it with a thin sandpaper. (water sandpaper) . Sodium hypochloryde may be tried also, but be careful with it.
Most water softeners remove calcium and limestone. These are not really harmful to humans, but cause a scaly build up in pipes and tanks.
No, it's false. Because temperature has nothing to do with diffusion.Diffusion is like this, imagine that you are pouring a water on a bathtub, if you pour the water on one side of the bathtub, the water will still go to the other side of the bathtub and then the water will be leveled inside the bathtub. Therefore no matter what temperature it won't affect the movement of water.
Try WD40
Cleaning a painted bathtub requires a gentle approach to prevent damaging the painted surface. Here's a step-by-step guide on how to clean a painted bathtub effectively: Gather your supplies: You'll need the following items: Mild liquid dish soap or a non-abrasive bathtub cleaner soft sponge or microfiber clothBaking soda (optional)White vinegar (optional)Soft towels or ragsSpray bottle (optional) Prepare the bathtub: Remove any bath mats or items from the bathtub and give it a quick rinse with warm water to remove loose debris. Clean with dish soap or non-abrasive cleaner: Apply a small amount of mild liquid dish soap or a non-abrasive bathtub cleaner to a damp sponge or cloth. Gently scrub
Shower is water that is sprayed over someone. Plumbing is the fixtures and piping that supplies water in a building. Shower plumbing would be the fixtures that spray water in a bathtub/shower stall.
More "VOLUME" flowing from the tub spout then the shower head as the shower head has a flow restrictor
Supply lines- Hot and cold water for each sink, bathtub, Jacuzzi tub, and shower. Cold water for each toilet. Drain lines- one for each sink, bathtub, Jacuzzi tub, shower, and toilet.
it depends on what your hot water level is
Bad shower valve.
It is calcium from the water as well as mold that forms from wet conditions. Put some white vinegar and water in a baggie and tie it to the shower head over night. That should make it easier to remove the gunk on the shower head.
A shower curtain is something that you hang in your bathtub or shower enclosure, to keep the water from getting all over the floor, when you shower. A plastic shower curtain is a shower curtain made from plastic. I think most of them are made from vinyl, actually.
I don't know if you are looking for any specific person, but if your question is why should you leave the shower curtain on the inside of the tub, the answer is simple. If you leave the shower curtain on the outside of the tub and take a shower, the water that runs down the curtain will be on the floor outside of the tub and you will have a mess to clean up. But if the curtain is on the inside of the tub, the water just runs out of the tub and thee is no mess to clean up. Conrad Hilton said it.
Turn on your bathtub or shower hot then turn it off at last turn on your hot water for your sink. Hope this helps!
form_title=Shower Door Repair form_header=8983 What repairs are required on the shower doors?*= [] "Door or glass panel leaks [] Door does not shut properly [] Glass needs replacing [] Glass is loose [] Sliding door(s) are off track [] Frame pulling out of wall [] Wall behind frame is soft, moldy [] Water damage" What purpose would the door or enclosure be for?*= () Bathtub () Shower () Combination bathtub/shower () Steam shower
The bathtub can waste close to 50 gallons of water per use. To save water, a shower is the better option and uses less water.
Shower, because you don't need the water below the surface and it is already dirty. It's like sitting in your own used dirty water so you'll be dirty anyways so why use water. If your taking a shower your using clean water and you can turn off the water when you don't need it.