Figured it out... Remove plastic trim from on top of radiator support. Remove grill. Remove battery & light sockets. remove 4 bolts... remove headlight assembly. Cheers
you have to remove to entire headlight assembly 2 screws on top and 2 nuts on the backside of assembly that go through metal panel
9004
how do i remove the computer on a 1989 ford f-150
Unbolt and remove everything bolted to the inner fender. Starting behind the headlight assembly, remove most of the bolts all of the way around the fender. With one or two helpers, hold the fender on while removing the remaining bolts, then the fender can be lifted off.
the fan and assembly are screwed on the pump. how do you remove
I have the same problem. You can't seem to take it off from the outside. All I was told is that you have to unscrew it from the inside somehow.
Check owner's manual. If you don't have one copy and paste link below; www.fleet.ford.com/maintenance/owners_manuals
The headlight adjustment for the 1989 F150 2WD is below the actual headlight. You will need to pull the tab at the top of the headlight up to release the headlight and then you can adjust the angle of the light with the long bolt below the housing.
drop the tailgate on side of bed where tailgate closes are couple of screws. thses hold the light assembly in bed. remove thse ,then remove light assembly light bulb is the able to be removed from back of assembly
Under the hood.
The assembly is held in place by the two 7/16 " nuts that secure the parking lights. So after you remove the two screws at the top and the 7/16" nuts at the bottom (removing the battery on the passenger side is very helpful), the light assembly is now loose. Twist the light bulbs to free them from the grill assembly and finish removing the grill. The headlight will be held in place by the inner grill assembly. You can now proceed with the removal of the front grill. Remove the 4 screws at the top of the grill and the one screw in the center below the logo and remove the grill. Then remove the 5/16" screw in the center, the two screws that face to the outside of the vehicle on each side at 10 o'clock and 2 o'clock. Below those at the front is a single screw at the bottom and then the two screws that secure the inner grill assembly to the front quarter-panels. The headlight assembly is then easily replaced by removing the clips that secure the assembly to the grill and removing the old assembly and installing the new ones. Then re-install the grill assemblies in revers order of removal.
lower the tailgate, remove the 2 screws on the side when you lower the tailgate, pull assembly out and replace