Want this question answered?
You will need to remove the retaining ring at the top of your 1995 Dodge Grand Caravan ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
It's located on the steering column 2 screws unplug the harnest
Why won't the keys in the ignition turn on a 1992 grand marquis?
Be more specific in your question. You haven't asked anything yet.
For a 1988 Mercury Marquis remove bottom shroud from steering column (5 Philips head screws). There is a wire running from the ignition switch to the left side of the steering column; detach it from the coupler (This can be done without a tool). Turn key to ON position until the panel lights come on. There is a small pin near the bottom of the key lock; push it in and pull the ignition switch out (don't panic if the wire seems to be stuck; it will come out). To replace, turn new ignition switch to same position. Push pin on the ignition switch in while sliding it back into the steering column. Reconnect wire and then replace shroud.
The repair section on autozone.com explains how to change the light switch.
I experienced a problem with a 84 Grand Marquis that would stall at stops. Found that the ignition switch in the steering column had separated that caused the stalling problem. Replaced the ignition switch that solved the problem.
on a 1997 Mercury Grand Marquis kill switch be activated by a rear end collision
remove radio from a grand marquis 2003
Fuse, loose connection, or the light switch. how do you remove the dashboard on a 94 mercury grand marque?
C.O.P. ( coil on plug ). Just remove the small screw, pull the coil up, disconnect the wire, and there you go.
where is the ignition control module located on mercury marquis