Want this question answered?
To remove a melted plastic bag from the bottom of a car, let the car cool down a bit, but not completely. Take a metal knife and chip the plastic gobs off.
Naval Jelly! Go here: http://www.howtocleanstuff.net/how-to-remove-melted-aluminum-foil-from-the-oven/
your hand
Depending on how severe the bond of the melted aluminum is to the oven bottom, there are two ways to resolve this problem. If very severe, the option is to replace the bottom plate which would probably cost only $30. If the bond melted material is only minimal, caustic soda can be used to clean it out. Use rubber gloves and the area must be properly ventilated?æbefore starting as the chemical reaction of caustic soda releases fumes that are harmful if inhaled.
you change it and replace it.......
Hi. Heat the racks over ver low heat (200 degrees or less). When the plastic becomes soft, remove rack and scrape plastic with old wooden spoon or use dampened Brillow pad. Hope this helps! KaCo, Independent Consultant, www.my2.tupperware.com/kaco.
You remove the pan on the bottom to drain.You remove the pan on the bottom to drain.
It is inside the transmission, remove the pan on the bottom to access.It is inside the transmission, remove the pan on the bottom to access.
A melted rubber balloon should only be removed by the power company. Removing it yourself could result in deadly shock.
To get melted rubber off of chrome, you need to heat it up again. This will allow you to carefully remove it from the chrome surface. You can do so using a blowdryer.
WD 40 and a razor blade.
there are phillip screws on the cowling, after removing the screws, remove wipers and remove winshield washer hoses on the bottom of the cowling.