By making use of the abrasive polish, you will be able to remove the polish residue. After the old silver polish residue has been removed, its polishing is very important.
To polish an old silver dish you should buy a good silver polish and rub it with a non-abrasive material. Silver can de delicatie so be careful!
You should never polish a silver dollar or any old coin. Any standard silver polish you have at home will damage the coin's surface and reduce its value.
You should never polish old coins, even if they have turned dark or black.
you call
wash it in silver water! You could polish it.
You could remove nail polish by using nail polish remover, or make your own DIY nail polish remover You could go search something up on Google, and YouTube helps too.
Only use special silver polish - other substances can seriously damage your silver. Since silver can be easily scratched, it's best to apply the polish to 100% cotton balls or and old toothbrush with softened bristles. There's more detailed information in the article below.
Pam cooking spray sometimes works on a soft cloth OR WD 40 will almost certainly do the job. depending on the type of tile, acetone ( nail polish remover) will certainly get the job done but remember to check it in an out of the way surface to make sure it doesn't remove the surface of the tile too..
First you must tell us what "glue " is. There are hundreds of different substances with hundreds of different ways to remove them.
Use any good brand of silver polish, and a very soft cloth. It will be impossible to get into all the fine details; don't try to. Rub softly until the cruet is clean. Wash with distilled water, and put in a bag with 3M silver preservative strips.
Bronze brush and powder solvents, such as the old standby, Hoppes #9. You might also try one of the treated cleaning cloths, such as a Wipe-a-way. Flitz metal polish can also be used for final cleanup.
There are a variety of weather stripping types, but with the old foam type you can just tear out the old stripping before you install the new stripping. If it is very old, there might be some glue residue which can be removed usually with something like nail polish remover. This is how we removed our old stripping. You can also find some very valuable information here: http://www.ehow.com/how_2215425_remove-door-weatherstripping.html