0
If you are talking about removing paint spatters from another project from the finished surfaces of the cabinets, the answer is maybe.
Depending on the age and integrity of the finish on the cabinets, the type (oil or latex), the length of time from the spatter to the clean-up, and the amount (spatters and a few drips or a big spill) of the secondary paint, it could be possible.
- a few still wet spatters of latex on relatively new clean factory finished cabinets, is easy, wipe with a cloth dampened with warm soapy water and well wrung out.
- a few fresh oil based paint spatters is a different thing, if you get to them immediately, a (water ) dampened cloth should deal with it. Do not use paint thinner on you cloth or you will most likely end up having to refinish the cabinets.
- big spills of either paint a more problematical. Do your best, but you are again most likely looking at refinishing the cabinets.
- a few dried spatters and drips of latex on relatively new clean factory finished cabinets should be possible. Carefully using the edge of a credit card or other flexible but strong tool, "pop" them off, being sure not to mar the finish of the cabinets. I have known this trick to work with relatively new, very small spatters of oil based paint, but isn't a sure thing.
NOTE: To avoid this problem in the future ALWAYS use drop cloths! This is not an unnecessary expense or time waster. If you are guaranteed you won't have to clean up any unfortunate errors, accidents or mistakes, you can move most quickly in your project and not end up spending hours with the possible problems.
If you are asking if you can remove the factory finish from you cabinets, the answer is a qualified yes.
The work is tedious, and requires a large investment in time, but properly done it can extend the life of old (or truly ugly) cabinetry for another five years.
- start by clearing the kitchen. You will not be using it for a while.
- remove all of the doors, and drawers upper & lower. Use masking tape on the back of the doors to mark where they go back. You will be glad you did this.
- remove all of the hardware (pulls, handles, and hinges).
- inspect the bases of the cupboards, upper and lower. clean and repair any problems. Take your time and be thorough.
- sand the outer surfaces of the base cupboards
- wipe down with a tack cloth to remove sanding dust.
- using a top quality paint (one designed for use on kitchen cabinets) and a good brush, apply your top coat. Work carefully and avoid drips. You may want to paint the insides of your cabinets, if they are in need of it, so this is the time to take care of that.
- allow to dry completely.
- take your cabinet doors and drawers to an area where sanding dust will not overrun your entire house (garage, etc.) place them on a surface that is a comfortable working height. Plywood on sawhorses works well. (Take my word for it you do not want to be trying to do this on your knees)
- inspect the doors and drawer fronts, repair any major cracks or damage and if you are changing your hardware, fill all the old screw holes with a good wood filler (sanded smooth)
- sand the doors and drawer fronts (front and back) to get a good surface to paint (you do not need to remove all of the old paint, just get a smooth surface with good tooth) Be sure to get all of the recessed areas if you have doors with raised panels.
- with a brush apply a top quality primer (check with a reputable paint retailer for suggestions)
- allow primer to dry.
- with a brush, apply a top quality, paint appropriate for kitchen cabinet use. (check with a reputable paint retailer for suggestions). If your cabinets have raise panels the process is a bit more complex - paint the recessed areas first, then the raised panel, then the outer edges.
- allow the paint to dry and cure (read the label for details)
- turn the doors over (put down a clean drop cloth to avoid scraping the finished surface. remove the masking tape with the door placement and put it on the work surface so you still know which door goes where.
- you should have sanded the backs of the doors at the same time as you did the fronts, so just wipe the surface with a tack cloth, and apply a single coat of your top coat. check the edges for drips and clean up while they are still wet.
- allow the paint to dry and cure.
- working with one door at a time (referring to your notes on the tape), reinstall the hinges and attach them to the frame.
NOTE - if you are changing the hardware, now is the time.
- once all of the doors and drawers are in place, reinstall the handles, and pulls (if you are using them).
- reload the cabinets and start using your "new" kitchen.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you remove painted paint on kitchen cabinets?
Professional people use some chemical for paint removal in London and I will advise you to get in touch with an expert for this.
How much do you charge for demolishing a kitchen?
If the cabinets are in good condition, advertise "Free kitchen cabinets. You remove."
Your kitchen cabinets have wood veneer finish can you paint over it?
Wood veneer can be painted over on kitchen cabinets. The paint should be a latex that is not of acrylic nature. Oil paint will only smear and not dry evenly.
I am remodeling my kitchen. Question I am asking is Do you paint around the cabinets or do you paint the walls before the cabinets go in?
Paint first. It'll be much easier to get it right and you won't have to worry about taping the cabinets. But, be careful not to scratch they new paint off when you then install the cabinets.
What is the easiest way to paint kitchen cabinets?
The easiet way to paint your kitchen cabinets will be to choose a color that will meet your taste, purchase enough paint to ensure all of your cabinet space will be covered, and buy enough paint brushes to complete the job.
What brand of paint is good for painting kitchen cabinets?
The best brand of paint for kitchen cabinets is an oil-based paint. Oil-based paints are the most durable and have a very high resistance to water, moisture, and other liquids. They also take longer to dry than latex or acrylic paints so they can be used on more intricate surfaces such as woodwork.
What type of paint and glaze can you use to paint kitchen cabinets without buying a kit?
You can buy a one-part, or precatalyzed epoxy that will give kitchen cabinets a durable and long-lasting finish. It can be found at most paint stores.
What does the term kitchen cabinet refer to?
form_title= Kitchen Cabinetry form_header= Install your dream kitchen cabinets with help from the pros. What is the square footage of your kitchen?*= _ [50] Do you need to remove old kitchen cabinets?*= () Yes () No What color cabinets would you like?*= _ [50]
Where can one find tips for painting kitchen cabinets?
You can find cabinet paint at your local LOWES hardware or any local hardware shop for that matter. but there are alot of different paint, you have to make sure to get the right paint or your cabinets. If you have wooden cabinets you have to get paint for wood and if your house is older it might have metal cabinets, you will have to get different paint then.
How can I easily refinish my kitchen cabinets?
I have done this, I have sanded them down and then have put a primer paint on and then either stain them or paint them what ever color you would like in your kitchen.
What are some inexpensive ways to update your kitchen?
One inexpensive way to update your kitchen is to resurface your cabinets yourself. You can either change the stain on the cabinets or even paint them an alternative color.
What is an easy and inexpensive way to refresh your kitchen cabinets?
The easiest way to refresh kitchen cabinets is to simply change out the hardware. With a little bit more work, a fresh coat of paint of the doors can really brighten up a kitchen.
