with a socket wrench
You can remove the 2001 Acura spark plugs with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs. Reverse the process to install the new spark plugs.
Disconnect the battery, remove the spark plug cables, and remove the old spark plugs. Put in the new spark plugs, attached the spark plug cables, and connect the battery.
Remove the old plugs, install new plugs.
Disconnect the battery, remove the boots and wires, and remove the old spark plugs. Put in the new spark plugs, reattach the boots and wires, and connect the battery.
spark plugs are located in the side of the head you remove them with a spark plug socket tip for you if you dont know where spark plugs are or how to remove them, i would get someone that does know, to do it or at least show you
Disconnect the battery, remove the spark plug wires and boots, and remove the old spark plugs. Dispose to the old plugs, put in the new spark plugs, replace the spark plug wires and boots, and connect the battery.
The plugs are removed with a ratchet and 5/8 inch spark plug socket.
They are under the 6 ignition coils. There is a coil for each spark plug. You have to remove the coils, and then remove the plugs.
You will need to determine what type of fluid then we can decide what the next step should be.
how to change spark plugs on a 2001 expedition
Remove the coil on top of the plug, then just remove the plug.
there are four spark plugs.