On your alternator, there should be two bolts on either side of the alternator. Losen the surentine belt up enoungh to slide off the pully of the alternator. Remove the two bolts on both sides of the alternator and slide the alternator up.
You can begin by removing the wiring harness from the back of your 1998 Dodge Grand Caravan alternator. Remove the alternator belt. Remove the retaining nuts. Reverse the process to install your new alternator.
how to hookup 1998 grand am alternator
You have to remove the wiper cowl assembly, and the alternator mounting brackets.
i had Pontiac 1994. Toremove two inner bolts i took radiator vent. To access outer bolt i took out a battery, air filter completed with a part of air intake.And i used mirror
You will need to remove the tire and wheel from your 1998 Pontiac Grand Am. Remove the brake assembly spring from the brake pads. The brake pads will come off. Reverse the process to install the new brake pads.
How do I remove cassette tape stuck in my 1998 Volkswagon beetle
under the hood. its the thing that looks like an alternator.
Where is the starter on a 1998 Pontiac Grand Am, 6 cylinder
drive cycle for 1998 pontiac grand prix, 3.8 engine, no super charge?
how am i supposed to no? I cant even drive yet xD
on a 1998 Pontiac gan am ,they do not have a pcv valve.
Remove the belt from your 1998 Chrysler Town and Country alternator. Disconnect the wiring from the alternator. Loosen and remove the alternator retaining bolts. Reverse the process to put the new alternator on.
Trans has to come out the bottom.
You don't have to remove the motor mounts,clock the engine,Remove the subframe or all that other garbage....Just remove the washer tank, wiper linkage,battery, & unbolt the alternator. It will just maneuver right out where the tank used to be.
You remove no pulleys. Just loosen the belt and then remove the alternator.
Thats going to be a dealer part for sure. Just got one myself
remove belt, remove alternator plugs, then bolts. pull out alternator. then undo bolts for bracket and remove.
yes as long as the grand am is a 2.4 twin cam also
I have a 1998 Pontiac Grand AM GT that coolant sensor went bad. So how do you change it with out breaking the coolant
what's the name of the part that comes from the egine block through the alternator bracket to the hose on the fire wall
You can easily get all of the color codes for every wire on the 1998 Pontiac Grand Prix. Pontiac has an official website homepage that has all the information on it.
where is the location of the body control module on a 1998 grand am se
Disconnect the 98 LeSabre battery. Remove the alternator belt. Remove the alternator wiring. unbolt the alternator, remove it, and bolt the new one on. Reconnect the wiring, but the belt on, then reconnect the battery.
first disconnect the battery - use a long breaker bar and socket to take tension off the tension pulley and at the same time remove the belt from the alternator pulley. disconnect the wires to the alternator make note of their positions. Then remove the 3 mounting bolts from the alternator.