That's a big job. You have to remove all the trim, the glove box door the a/c controls, the instrument panel, you must disable the airbags, pry out the defrost grill, remove MANY screws of various lengths, and eventually the dash being hinged at the bottom rolls downward and lifts out of its hinges. If you are doing this to replace the brake vacuum booster, dash removal is not necessary. Just pull the steering column out in that case.
Yes.
There are several bulbs for dash illumination. They are attached to the backside of the dash cluster. The best way to access the bulbs would be to remove the dash cluster.
mine is located on the drivers side of the dash
where do i put coolant in for 1994 Chevy s10 pickup
Will a Chevy blazer engine fit in a Chevy s10 pickup
Will a Chevy Blazer engine fit in a Chevy s10 pickup
4x6 in the dash 6 1/2 in the front doors
The payload for the 1985 Chevy S10 pickup is between 1000 and 1500 pounds depending on the exact model. The S10 is the smallest of the Chevrolet pickup series.
Behind the dash assembly inside the HVAC assembly. The dash assembly needs to be removed to gain access to it.
Where is the fuse for the digital cluster dash in a 1992 Chevy S10?
The heater core comes out from the inside. If you have air it is a little harder. Remove the dash bolts it does not need to come all the way out. also remove the glove box this will help you remove the heater box which the heater core is behind pretty easy after the dash is out of the way hope this helps
You will need to remove the transmission to replace the clutch slave.