To remove the distributor on an EA Falcon, first remove the distributor cap. Use an extension bar to reach and remove the small lug that holds the distributor.
dont bother its a ford
could be distributor, coil or ignition module. usually the ignition modules fail first on them.
Ford EA Falcon was created in 1988.
to remove the pedal box the whole dash has to be taken out, absolute pain in the ass
Flush engine. Allow car to idle. Remove sump plug and let it drain. Remove filter with jaw type oil filter wrench. Replace existing filter with a quality z9 filter, mostly used on ea falcon.
just start taking out bolts until the radatior is loose. also remove the trans cooler lines and radatior hoses.
depends on ea falcon, is it 3 or 4 speed? and age of ea, if its 4 speed and a later ea u can, the other problem is the gear shift handle, the differ slighty from ea, eb, ed, to ef ef series, but a little stuffing around u can get it
With a hammer or a brick.
1,5,3,6,2,4.
To replace the distributor cap on a 1996 Ford Falcon Futura, you first need to remove the screws holding it in place. Then pull the old cap straight off. Replace the new one, in the opposite order of removing the old one.
111
There is a special tool to remove the pump but you can remove it by using 2 screwdrivers that fits in the slots around the pump and turn the big plastic nut, its not easy but I have removed them several times