If you are still trying to find out how to remove inside door panel for '96 Toyota The steps are as follows:
1. Remove window crank (it has a kind of 'bent wire' c-clamp, which holds it onto the window crank shaft).
2. Pry upwards the top plastic cover to the arm rest (this is a plastic coated foam rubber piece, on which you rest your arm).
3. Remover the two now visible screws which fasten the arm rest onto the door.
4. Remove the one screw fastening the inside door handle.
5. With a blunt tool, gently hit the inside door handle in a forward direction (towards the door hinge). This will release the door handle from the door.
6. Pry between the door panel and the door, to unsnap the snaps holding the door panel in place.
7. Finally, lift door panel out and up to remove it from door.
how do you take the wires from the alternator on a 1997 Toyota Tercel
To change the burned bulb in the instrument panel of a 1997 Toyota Tercel, first, disconnect the battery to ensure safety. Remove the instrument panel by unscrewing the screws that hold it in place, then gently pull it out. Locate the burned bulb, twist it counterclockwise to remove it, and replace it with a new bulb. Reassemble the panel and reconnect the battery to complete the process.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lilrock@live.com
r134a
A cloud
You use a ratchett?
Look at the bottom end of the engine
Behind the drivers side kick panel where the fuses are located, using a 10mm socket and a philips head scrwe driver, remove the lower portion of the dash. When you removed the lower dash portion the fuel pump relay is located to the right of the fuse panel. You have to remove the panel (3 screws) to get to the relay tho.
On a 1997 Toyota Tercel, the cabin air filter is located behind the glove compartment. To access it, you need to remove the glove compartment door by detaching the stops and screws. Once the glove compartment is out of the way, you can find the filter cover, which can be removed to replace the filter.
To replace the heater motor in a 1997 Toyota Tercel, start by disconnecting the battery and removing the passenger side dashboard panel for access. Locate the heater motor, which is typically situated near the firewall. Disconnect the electrical connector and unscrew the mounting screws to remove the old motor. Install the new heater motor by reversing the steps, ensuring all connections are secure before reassembling the dashboard and reconnecting the battery.
4 litres or one gallon
33 ft-lb