First roll the window all the way down. Then pop off the trim around the chrome handle. Under the armrest will be a little plastic cover that when removed you can access a screw that needs to come out. Once you have it out all you have to do is lift up on the whole panel.
bring it to a body shop and have them do it if you need to ask a computer you shoulndn't be doing it yourself
Try in the trunk on the driver side. Also check around the kick panels inside the car. The kick panel is the panel between the door and the firewall. Be sure to check both left and right sides, possibly behind the panels. You may have to remove the panels.
unplugg it
Four.... two in the front door panels and two in the back
You have to remove the inside door panel to get access to the door handle nuts.
Remove the door panel by taking out the Phillips head screw behind the light lens. Remove the swithes on the door panels carefully, they pop out and then there will be Phillips head screws holding the wire to the switch itself. The door panel raises upward and is held on by clips built in to the door panel. Once the door panel is removed, the speakers screws will require a star tip driver. Rear panels have grilles that snap off from the bottom first and then they slide down and off for easy access to the rear speaker. Both sizes are 5 X 7's or 6 X 8's, either one.
First disconnect the battery, remove the door panel and pretty straight forward from there.
disconnect wiring harness, mark hinges, remove bolts securing hinges to body.
you must remove the door panel. you will need a star head bit to take the screws out.
Disconnect the positive cable from battery, carefully remove the bolts attaching door panel and disconnect electrical connections and lower window before disconnecting battery and remove the two bolts holding the door handle on and remove the linkage and reverse for installing.
You do not remove the pin. Remove the bolts holding the entire hinge from the door. You need a helper to do this, and will need help aligning the new door. Mark the location of the old hinge with a marker around the outer edge of the hinge and replace it as close as possible in the exact same location.
The Mark on the Door has 192 pages.