Want this question answered?
Take out the fan cover, then remove fan, then the hoses, then the water pump. you can do everything from the top.
How do you remove the fan shroud on a 2004 get envoy
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
the fan and assembly are screwed on the pump. how do you remove
The fan clutch on a 1997 S10 has a bolt on the center of the front. Remove the bolt while holding the clutch still. There is a special tool to grab the clutch fan from the rear to hold it while removing the bolt.
Remove the wiring harness from the back of the blower motor in your 1993 GMC 1500. Remove the blower motor retaining bolts. If the new blower motor does not have the fan attached to and you will need to remove the fan from the old blower motor. Reverse the process to install the new blower motor.
were is the heater relay on1996 jimmy?
Auto Zone or any parts store that loans tools should have a fan clutch tool. it holds the pulley while you loosen the fan clutch nut
Remove the shroud and the fan. loosen the clutch bolts .... not always easy. We have more detailed instructions at our enthusiasts website. www.trailvoy.com
the thermostat is located on the safari is located top front center of engine, remove the air filter box and the air intake , also remove top portion of the fan shroud,then follow the top radiator hose directly to it . it will take more time getting to it, then it will to replace it.
-drain coolent -remove serpentine belt -remove clutch fan -remove rad hose going to water pump -unbolt and remove water pump
you'll have to take off the front of the motor for the best access: 1. remove the fan shroud 2. remove the radiator and all hoses 3. remove the fan 4. remove the accessory drive 5. remove all to get to the four bolts of the water pump.