looking for help on the brake light ground wire location for 1999 gmc suburban 4x4
The torsion bars on a 1999 4x4 Chevy Suburban are adjusted by turning the adjustment bolts. They allow the vehicle to be moved up or down as needed.
The factory stock weight of a 1999 1500 4x4 Suburban is 5,226. A 4x2 only weighs 4,769. Modifications and added equipment, factory or not, will change this weight.
The 1999 Chevrolet Suburban speed sensor is located on the back of the transmission. The speed sensor will be in the upper left-hand corner.
It is in the tank. You need to remove the fuel tank to make this replacement.
Yes as long as the 99 is the OLD body style.
In the fuel tank. To get at it the fuel tank must be removed.
where is the oil pressure switch on a 1999 chevy surburban
will a 4l60e fit in 2002 suburban 4x4 1500
buy the gas tank
you have to remove tank
No, the fuel pump is in the tank, just remove the fuel tank.
You have to remove the hub,
drop the fuel tank
The only way is to remove the tank.
the fuel pump is located in the fuel tank, but the fuel pump relay is under the hood with the fuses. Drivers side near the firewall. It is under a black plastic cover.
The fuel pump s inside the fuel tank. To change it you have to remove the fuel tank.
YES you sure do.
Most all suburban that year are 4x4
It is bolted to the bottom left side of the timing cover / behind the harmonic balancer.
NO IT DOES NOT.
you remove the whell and then remove the bolts from the back of the calipier then remove the bolts from the monuting for the caliper then remove the rotor by pulling it off. if it is all one piece then you have to remove the hub itself