automatic, or standard 5 speed
Answeron a 5 speed AnswerWell.. i have a 98 sc2 5-speed and all i did was remove my center counsel. there are about 2 screws on both the pass. and div. side, about in center-rear. a plastic cover might conseal it. just use a flat tip or a pocket knife to open it. Just look carfuly and you shouldn't miss it. you might have as try in the rear of the counsel so you should just be able to take it out. lift from the back first and then the front of the counsel. The plastic part for the radio and the thermostat might clip on to it so you might have to take that out too. I know i didnt. There will be wires for going to your window controler and dim light so you should just be able to quick disconnect them. this should expose the likage for the shift knob. Move the leather cover for the Kobe out of the way so you have more space to work with. I replaced it the original with a shift knob that was 3'' shorter. but if you just want the actual knob itself then it should just come right off by pulling.you might have to turn it about 90 degress and then pull it but im not too sure about that..all i did was replace the knob with linkage (short sifter)you have to tear it off because the shifter has a c clamp inside the material part of the shift knob.
Gear shift linkage?Remove gear shift from top and align
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
== ==
To remove the gear shift knob on the SLK 320, first pry the cover from the gear shift knob. Then, use a screwdriver to remove the screw in the center of the knob. This will then allow the knob to be removed.
To remove the gear shift knob on the '03 Silverado, first pry off the cover that has the shift pattern on it. Then, remove the screw that is under that cover to remove the knob.
light is out in the gear shift area between the seats,how can I change it?
Escort doesn't have a gear shift cable. It has a gear shift rod. To remove it: Remove the shift control rod nut and bolt Take off the shift knob. Remove the console. Remove the shift boot. Pry out the shifter spring. Lift the shift ever out of the housing. Take the nuts that hold the shift housing on the end of the extension bar. Take the extension bar from the transaxle, lower the shift housiing and take the shift control rod from the transmission.
Concole
Probably the shift linkage in that model.
how to remove gear shift knob on bmw318
Your synchro is going bad.
There SHOULD be a switch on the brake pedal that disengages the gear shift locking solenoid. Once you press on the brake pedal, the gear shift should move easily. If not, either the switch or solenoid has failed, or one of them is out of adjustment.