Remove the (2) two headlamp assembly bolts from the upper fascia support. Slide the headlamp assembly outward enough to release the headlamp bracket tabs from the slots in the upper fascia support. Position the headlamp assembly away from the vehicle body to access the electrical connector. Disconnect the electrical connector from the headlamp assembly. Remove the headlamp assembly from the vehicle. If you wish to change the halogen bulb: Disconnect the electrical connector from the headlamp bulb/socket. Remove the headlamp bulb/socket retainer ring from the headlamp, by turning counterclockwise. Remove the headlamp bulb/socket from the headlamp assembly. Hope this helps. G These instructions are similar from around '96 to '03 grand prix model years.
Remove the headlight directly above the fog light,you can reach down easily to access the lamp
how do you remove dash from a 2000 Pontiac grand prix se
No, the only thing it could possibly do is blow the bulb.
just remove it
You unscrew the screws
Not possible. You have to remove the whole light assembly.
when you remove the back seats on a 2000 Pontiac grand am SE if you look threw the trunk there will be a string that you pull that will fold the seats down and at the bottom there will be two latches to remove seats
just pull on it!
I'm trying to replace the headlight assembly for a 2000 Jeep Grand Cherokee Lerado. What bolts or screws do I remove
The front speakers on a 2000 Pontiac Grand Am are 4x6. The rear speakers on a Pontiac Grand Am are 6x9.
where are the oxygen sensors on a 2000 Pontiac grand am and how do you change them?
Thermostat housing diagram for a 2000 Pontiac grand am?