Start by removing the front of the headlight (inside light will be full of wire connectors you'll have to disconnect these connectors in order to get lamp assembly out of the way).
With the headlamp either pushed aside or taken off completely remove the bolts holding the tack/speedo assembly. Then unscrew speedo cable from unit.
Now the unit is loose leave it where it is and find the bolts holding the fuse box.( These are a little tough to get off-careful).
Now with the fuse box loose take the bolts off the back of the ignition switch and slide her down (you might have to move the brake line around to get the right angle)
Good Luck
Remove the switch by boring out the rivets holding it in place. The cylinder will come out easily once you get the lock free from its casing.
Depending on the type and model of motorcycle, the ignition switch can be easy to change. Many bikes have a ring that rotates like a nut to remove the switch, then the wiring plugs on.
How to remove ignition switch
www.denniskirk.com
Remove the ignition switch retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.
sure it can
Remove the retaining ring from the top of your 1990 Lexus ignition switch. The ignition switch will slide out. Remove the wiring harness.
Remove the retaining ring from the top of your 1989 Chevy Corvette ignition switch. Slide the ignition switch out and remove the wiring harness.
how do you remove an ignition switch from an 07 kia optima
the question is, how don't you remove new beetle ignition switch?
Remove the retaining ring from the top of your 1999 Chevy Cavalier ignition switch. Slide the ignition switch out and remove the wiring harness from the end of it.
remove ignition switch 92es300