Want this question answered?
Its for installing an auxiliary audio device, like a CD changer or a satellite radio. You have to remove your radio to attach a device to it. There was no auxiliary input in the 2003 Toyota matrix and was not optional the first aux was for the 2006 matrix and up
remove wheel and remove the plastic liner inside the fender. remove the radio and disconnect the antenna wire. Tape another, 10' long wire to the end of the antenna wire. Unscrew the nut around the antenna from on top. pull the antenna and antenna wire out through the fender. Tape the 10' long wire to the new antenna wire and pull it back through the dash to the radio.
The stock roof-mounted antenna on the 2005 Toyota Matrix will unscrew from the antenna base that is attached to the roof. If your original antenna has been stolen, you should be able to obtain a replacement antenna and just screw it on the the antenna base that is still attached to the roof of your Matrix.
Responde a esta pregunta ...
Most Toyota trucks have their antennas unscrew. So try to just unscrew the antenna at the base.
Remove the old antenna. Attach the universal antenna to the radio and replace the radio after finishing the task. Install the new antenna. Test to ensure the wiring works.
Remove the 1993 Toyota decorative radio cover in. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness.
Remove the decorative cover from your Cadillac Eldorado radio. Remove the radio retaining screws. The radio will slide out. Remove the wiring harness and the antenna cable from the back of the radio.
remove the nut at the base of the antenna. Slide off the grommet. The antenna will drop os hold on the the antenna as you remove the nut and grommet. Once this is removed. You will see how to remove the antenna unit.
Remove the cover from your 1986 Chevy Cavalier radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
Remove the decorative radio retaining plate. Remove the retaining screws. Pull the radio out. Remove the wiring harness. Remove the antenna cable.
Unscrew it.