To take the shift lever off the steering column, you'll need to tap out the switch actuator pivot pin from the steering column housing. Once the pin is removed, the lever will slide out, but make sure the spring inside the housing that puts tension on the lever isn't lost or displaced.
To reinstall, you'll need a thin metal shim to press the spring down in order to be able to reinsert the shift lever & pin.
If you are going long distances it is best to remove the driveshaft
Try going to an auto shop an ask one of all of the workers or try the internet
Maybe brake shift cable from brake to gear shifter?
Pull the door panel off remove old motor and replace with new if you need more help a chiltons auto repair manual is worth a million buck go get one for your car
Automatic Floor Shifter - 25 results like the 6423 Shifter Automatic, B & M 81011 Street Rod Shifter Auto Trans Shifter Kits, 3160009 Quarter Stick Shifter ...
The PCV is located next to the oil dipstick on the right side of the engine when facing the engine.
To replace the shifter cable on a 1997 Sonoma, first, disconnect the battery to ensure safety. Remove the center console to access the shifter assembly, then detach the old cable from the shifter and the transmission. Install the new cable by reversing the disassembly process, ensuring it’s properly connected at both ends, and reassemble the console. Finally, reconnect the battery and test the shifter to ensure it operates correctly.
then your manual
If it's an auto, you could just get an aftermarket cable shifter from a speed shop.
You will have to remove the transmission pan that is on the bottom of the transmission to drain the fluid.
A Taurus auto that will not shift from the column shifter is usually due to a transmission issue. Transmission's are an expensive fix. Shop around before committing to one mechanic.
The center of knob...the part you press down when changing gears, is removable. Pull up on it gently with a small screwdriver etc. When it's off, there is a snap ring to remove. You can now remove the knob.