yes I had a 89 it didnt have one but Iv been told that a peg on the speedo on 88 to 94 had a sensor but if the peg got broke off they would keep going.That maybe BS not sure but my 89 with that white bar thing for a speedo went passed 85mph to the 20mph and I back out(big pussy)I have a 95 chev first year of the newer dash.Im the sec ower of it and my truck has all the bells n whistles but it dies at around 100mph.you may try a jet chip,hyper tech chip one of those
The governor is located in the transmission it is a silver cylinder that goes inside the transmission unplug the unit and remove the two bolts that hold it in place."PRO TIP your speedometer will not work when the Governor is removed as the two work hand and hand...
It does not have a governor. Speed is controlled by the ECU.
There is no governor to remove. Speed is controlled by the ECU.There is no governor to remove. Speed is controlled by the ECU.
It has no governor. Speed is controlled by the computer.
It does not have a governor. Speed is controlled by the computer ECU which you cannot remove nor reprogram.
Remove speedometer head to unscrew and remove cable Remove cable from transmission Re-Install new cable using same routing as original
Reprogram the PCM
You can't remove the governor because it does not have one. The revolutions of the engine and top speed are controlled by the ECU.
Left side of the where the speedometer is there will be a panel you can remove and there will be where the fuses are
Remove speedometer head Disconnect old cable Follow original routing for new cable Disconnect fitting at side of transmission and remove cable - replace with new
Ask him to please step out. ;-]
I've had mine at least goin over 100 maybe 105. With 350 mines a 93 ext cab 4wheel drive.