I have a 1993 Lumina Euro sedan with a 3100 V6. I have replaced the starter. Of course, first disconnect the battery. The starter will not drop straight down, so I had to remove the oil sending unit which is located near the starter (toward the passenger side) and also the oil filter (similarly located). The, after removing the bolts and wires from the starter, it can be moved toward the passenger side of the car and dropped down. Put the new starter in by reversing the path. It's a little messy, because some oil will likely spill when you remove the oil sending unit and the oil filter, but that's how I did it. It works the same way on the 1993 Lumina 4 door Sedan, had a time finding all the screws for the plastic dust cover (for a lack of better words). Try to clean the area if you have had some leakage it makes it so much easier to work with.
Remove the positive battery cable from your 1993 Chevy Cheyenne battery. Remove the two cables from the front of the starter. Remove the three starter retaining bolts. Reverse the process to install the new starter.
Begin by removing the positive cable from your 1993 Chevy Corsica battery. Remove the cables on the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the water return hose from your 1993 Chevy Lumina water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
Begin by removing the positive cable from your 1993 Chevy Camaro battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. The starter will come off.
Lumina in USA does not have a carburetor
Drain the water from your 1993 Chevy Lumina cooling system. Remove the water supply hoses to your heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
I have a 1993 Chevy lumina van that has heat but doesn't have a fan how do I fix the fan?
It's attached to the starter.
Remove the tire and wheel from your 1993 Chevy Lumina. Remove the brake assembly spring and the brake caliper. The brake assembly will come off. Tap on the rotor with a hammer or mallet. The rotor will slide off. Reverse the process to change the new rotor and brakes.
123456
NO.
how do you change the heater hoses on 1993 chey lumina 3.8 liter