Want this question answered?
Under the intake madifult
The acura vigor does not have a block heater.
My 92 Vigor has 5 clyinders
Look for the same answer. where is the location of an 92 - 94 acura vigor flasher?
The front bearings on an Acura Vigor are pressed on bearings, unless you have access to a press or know of a shop that can do this for you I wouldn't attempt this job.
how to remove the starter from a 92 s-10 4x2 with a 2.8 engine
Many factors play a role in engine longevity. Provided the routine maintenance is performed regularly according to the maintenance schedule, Acura's will last a "long" time. I have 225K miles on my Vigor.
To refill the brake fluid for a 1992 Acura, you need to remove the cap on the brake fluid reservoir. Add fluid until the dipstick measures full, or the line on the reservoir that says 'full' is touched by the brake fluid.
I just did a full replacement of the Vigor Blower Motor. It took almost 12 hrs. Here are the instructions I followed to the letter. http://pw1.netcom.com/~gentile/Vigor/Timely1102.htm
The Vigor is rated at 176HP and 170lb of torque, but my friend had his all-stock Vigor tested at the dyno after hearing rumours that it is higher, and lo and behold he hit almost 200HP! So 185-190 horses is a more realistic estimate.
Check your starter it may be grounded when hot.
I am a installer movil electronics yoghurt`s sound and to disable the factory alarm in 92 Acura vigor is to take-off the drivers door panel. It a 6 o 7 wires to run from the door key cylinder grab the wire green/black and grounded that`s it.