To remove the tailgate from a 2013 Dodge Ram 1500, start by ensuring the tailgate is in the fully open position. Locate the hinge pins on either side of the tailgate, and use a flathead screwdriver or a similar tool to gently pry out the retaining clips. Once the clips are removed, lift the tailgate upward off the hinges. Be cautious and have an assistant if necessary, as the tailgate can be heavy.
No, they are different body styles.
2002-2005
First remove the door panelRemove the moisture barrier.Disconnect the rods from the handle inside the door.Next remove the two bolts holding the handle on.
Lower the tailgate and remove 2 screws. Grab taillight and pull firmly to the rear. Release tabs that hold bulb.
Remove the wiring harness from the back of your 1996 Dodge Ram 1500 alternator. Remove the belt from the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
To remove the factory stereo on 1996 dodge ram 1500 you need to pop the hood on the Ram and remove the ashtray. Slide the stereo out of the dash and unplug the cables from the back of the stereo.
You have to remove them and inspect.You have to remove them and inspect.
Can you be just a little more specific? Fix what? the latch mechanism, a hinge? Do you want to know how to take it off?
how to remove and replace transmission fluid pressure switch on a 2002 dodge ram 1500
Radiator. Remove the cap and add coolant there.
Lower the tailgate. Remove the two screws on the inside to the side of the lamp assembly with an torx wrench. The tail lamp assembly will pop out. Remove the four screws on the backside of the tail lamp with a Phillips head screwdriver. You now have access to the bulbs.