Want this question answered?
if your 1987 Nissan pickup leak water from manifold what do we do
Not sure on a '94, but on a '90 w/ a 1.6 you just remove the pulley bolts on the water pump, take off the pulley and belt, remove the thermostat housing on the side of the water pump, and then remove the water pump bolts. After that you can take off the water pump.
The water pump on a 97 Nissan Sentra is behind the timing belt. To replace it you will need to drain the coolant, remove the cylinder head, loosen pulley bolts, drive belts, and water pump pulley. Next, remove coolant hoses, water pump bolts, and finally the old water pump. Reverse directions to replace with new pump.
ca20? remove all the belts, water pump pulley, underdrive pulley, timing chain cover and timing belt and the water pump is accessible. I would replace the timing belt too.
jack up front of car passanger side remove front passanger tire open hood remove serpentine belt easiest way is use belt tensioner tool locate water pump pulley remove bolts holding pulley on can use vicegrips to keep pulley from turning remove bolts holding pump on reverse process
located and connected to the fan,drain radiator,remove both ,radiator hoses, remove fan belt,remove fan shroud,remove radiator.remove fan,remove water pump.
Its on the front of the engine. The pulley with the fan.
connected to your water pump.
pulley puller
disconnect battery and remove,drain radiator.remove top and bottom radiator hose,remove all 3 belts,remove fan shroud,remove fan blade,remove radiator,then remove water pump,when putting back together,replace thermostat.
Just remove the 4 bolts that attach it to the water pump. Remove from fan, place new one on fan (4 more bolts)
No It Can Not.