0
Depends on the leak.
- Do NOT forget to close main water tap or safety taps before disassembling any tap.
- If the tap keeps dripping on the "spout" even when it is off then it is a problem with the mono bloc cartridge that controls water flow. It can be replaced by removing the lever (is is usually press fitted) and unscrewing the top of the tap. The cartridge should be exposed and easily removable. A new, compatible cartridge is inserted and secured.
- If it is a rotating "spout" and the leak occurs at the rotating base of the "spout". In this case the tap is disassembled and there should be 2-4 O rings keeping the water in. These need replacement. Some have metallic O rings that are very difficult to install. Lime can damage these O rings and usually builds near the edge of the base of the "spout" that rotates and the rest of the tap. To complete disassemble the tap remove lever, unscrew the top of the tap, remove the metal pipe that is between the top and the ring part of the "spout". The "spout" should slide up revealing the o rings.
- Connections to the tap could also leak. Flexible tubes can be unscrewed using a small wrench and have 1-2 rubber O rings that can be replaced The taps fixed directly on the pipes have rubber washers. To replace these you need to remove the tap by using a wrench and unfasten the nuts holding the tap to the pipes. The rubber washers are between the pipe and tap. After replacing the washers do not overtighten the nuts as you could damage the new washers.
- You could always replace the tap.
What else can I help you with?
What type of basin is required with a monobloc mixer tap?
A monobloc mixer tap typically requires a single, pre-drilled tap hole basin to install. This type of basin is designed to accommodate the single unit nature of a monobloc tap, which combines both hot and cold water controls into one unit.
What country uses single lever kitchen mixer tap-ware?
we have it in Australia...
What simple machine is a hand mixer?
lever
A mixer is what type of simple machine?
A mixer is a compound machine that usually includes simple machines like gears and levers. However, if we were to categorize it as a single simple machine, it would likely be considered a lever because of the way it pivots on a fulcrum.
Where can one take their KitchenAid mixer for repair?
If one has a broken KitchenAid mixer in need of repair, take it back to the place of purchase. They may advise that the company needs to be contacted in order for a repair to be made.
How do you remove the attachment to a KitchenAid?
To remove the attachment from a KitchenAid mixer, you typically need to turn off the mixer, lift the attachment release lever, and then gently twist and pull the attachment to detach it from the hub.
Need a repair manual for kitchen aid mixer KSM90WH?
http://tinyurl.com/mfk8t9
Kitchenaid mixer Model K4-B repair parts you?
Enter "Kitchenaid mixer K4-B parts" in your Google search window. A number of sites will be listed where parts can be purchased.
Where to change 3 phase mixer to single phase?
More details required
How can I fix my slow-running commercial grade stand mixer?
You can check to see if there is a problem with the stand motor in your commercial grade stand mixer by bringing the machine to your local repair shop for an evaluation.
Kitchenaid mixer Model K4-B repair parts I'm wondering if repair parts for todays models will fit.?
its possible if you look at pics to mod parts
Where can you get a repair manual for a hobart M802 mixer?
You can obtain a repair manual for a Hobart M802 mixer from several sources. The official Hobart website often provides manuals for their products, so checking there is a good first step. Additionally, you might find repair manuals through authorized Hobart service centers or distributors. Online platforms like eBay or specialized equipment repair websites may also have downloadable versions available for purchase.
