answersLogoWhite

0

To replace the headlight bulb give the socket a slight twist and it will come out of the composite headlight assembly. Unplug the old bulb from the socket, insert the new bulb and put it back into the composite assembly giving it a slight twist to lock it in place. Be sure it locks in place.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Where is the fuel pump location on 1988 Chevrolet Celebrity?

The fuel pump on your 1988 Chevy Celebrity is in the fuel tank.


How do you Replace headlight knob on 1988 Chevrolet celebrity?

To remove the knob there is quick release on the back edge of the knob, simply push the lever and the knob will pull off. To install a replacement knob simple push it onto the shaft until it clicks into place.


How do you adjust the timing on a 1988 celebrity?

The 1988 Chevrolet Celebrity uses distributor-less ignitions. Timing is controlled by the ECM, there is no provision for adjustments.


Does a 1988 Chevrolet Celebrity have rear struts?

No there are shock absorbers on the rear.


Where is the oil sending unit on a 1988 Chevrolet celebrity 2.8L v6 located?

The oil pressure sending switch on a 1988 Chevrolet Celebrity with 2.8L V6 is located on the bottom of the block near the oil filter.


Is the factory timing chain on a 1988 Chevrolet celebrity metal or plastic?

Metal.


Where is the transmission solenoid located on a 1988 Chevrolet celebrity on the inside of the pan or outside?

On a 1988 Chevrolet Celebrity, the transmission solenoid is located inside the transmission pan. Specifically, it is part of the valve body assembly, which is accessible only when the transmission pan is removed. Therefore, to access or replace the solenoid, you would need to drain the transmission fluid and remove the pan.


What type of freon is in 1988 Chevrolet Celebrity?

R12 unless it's been converted.


Where is the oxygen sensor on a 1988 Chevrolet celebrity?

If your 1988 Chevrolet Celebrity has the V6 engine the oxygen sensor is in the middle of the exhaust manifold nearest the firewall. If you have the 4 cylinder engine the oxygen sensor is located in the exhaust manifold just above the exhaust pipe flange.


Where is the crankshaft sensor located on a 1987 Chevrolet celebrity 4 cylinder 2.5?

It on the back of the coil packs going into the side of the block.


What does the timing need to be set on on an 88 Chevy Celebrity?

The 1988 Chevrolet Celebrity uses idistributorless ignition systems, the timing is controlled by the ECM. there is no provision for adjustment.


What is the firing order for a 1988 Chevrolet celebrity with a 4cy?

The firing order for all of the Chevy Celebrity 4 cylinder engines is: 1 3 4 2