were about on the engine is the coil pack for a renuault 1.4 16 vaule
How do I get to the bottom bolt on the coil pack of my 2000 Camry
bad coil pack... replace coil pack
To replace a coil pack you will have to do a few steps. Start with disconnecting the battery cable, open hood, go to the coil pack, unplug the old one, plug in the new one, recharge the coil pack and then shut the hood.
A coil pack can be checked for continuity and resistance with an ohm meter. But for heat or load failure the only way to check a coil pack is to replace it.
There is no coil pack on that year.
http://www.ehow.com/how_4509339_replace-ignition-coil-pack-ford.html
About 200$ for parts and labor
replace the coil pack.
well if you truck have a coil pack you would have to replace the hold pack but if they a indviseual you can replace each one if thay are seprate it will cost a bout 100 apiece
locate the coil pack on right hand side top and undo the 4 screws /disconnect the wiring plug and replace with new one then plug Leeds in the same Way
remove the plastic engine cover from top of engine, you will have to pull the fuel rail as it runs above the coil packs, remove the screw that holds the coil pack and unplug the harness then pull coil pack and plug wire assembly out.
With multiple misfires originating from the same coil pack, my guess would be to replace the driver's side coil pack.