The Replacement door handle is easy to install and is a good-looking substitute to your stock whenever they become erratic and irregular for their functions. They are also equipped with everything that will make it work, from its door lock button to its pull lever. But as a rule, you will still need to take off the entire door panel and work with the window glasses fully up. There will be five screws you need to pry from the inside door panel: two on the edge of the door with caps, two in the door handle with one underneath the light, and one underneath the middle of the mesh cover. In addition, there will be two pins on the outer edge of the door which you simply have to press with a screw driver. Insert this screwdriver between the pull handle and the trim. Pull down while you pull with your fingers on the other end. As the trim gives, pull the handle and take it off. At the bottom edge, there will be plastic clips that you'll need to pop loose as well as the window grooves. Take off the weather strip and take off the three remaining bolts on your interior door handle. The door handle will be attaches to a rod and bolt; wiggle the handle to loosen. Now, you are ready to retrace those steps backwards to install your new door handle
The 2001 Toyota Camry has 16 valves.
every 100k miles
The 2001 Toyota Camry is a gas-powered vehicle.
The 2001 Toyota Camry has an inline 4 engine.
The height of the 2001 Toyota Camry is 4 ft. 7.4 in. (55.4 in.).
The 2001 Toyota Camry has double overhead cam (DOHC).
The 2001 Toyota Camry has a drag coefficient of .30 Cd.
The 2001 Toyota Camry runs on regular unleaded.
The curb weight of the 2001 Toyota Camry is 3042 lbs..
The 2001 Toyota Camry's turning circle is 35.4 ft..
The 2001 Toyota Camry is 15 ft. 8.5 in. (188.5 in.) long.
No, it will not.