0
The Hazard/ flasher combo switch is located directly behind the Hazard button on your dashboard. This combo switch controls functions for the flashers as well as the hazard lights. There was a recall on this part because it can malfunction causing the Hazard lights to fail in case of an emergency. Doesn't hurt to try to get a dealer to look into it, if not, the switch costs around 45 dollars and is a dealer part. It is a fairly easy job. You have to locate all the screws around dashboard and remove them. Be sure to open up the fuseboxes on the driver's side of the car because 2 screws can be located there also. Once all the screws are out carefully pry the dashboard off and remove the switch and replace it with the new one. The dash board snaps back into place so if you are crafty enough you can only remove half the screws of the dash board to gain access to the switch. Hope that helps. All you need is a Phillips screwdriver.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you replace brake light switch in Chevy Monte Carlo?
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
Is the flasher built into the hazard switch that's all I have found behind the hazard button on a 2001 Chevrolet Monte Carlo?
yes
Where is the turn flasher on a 1999 Chevrolet Monte Carlo?
May be part of the hazard warning module - part of the switch
How do you replace emergency flasher on a 2001 Monte Carlo ss?
The 2001 Monte Carlo emergency flasher relay switch and the turn signal flasher relay switch are the same. The flasher relay switch simply plugs in and out.
How do you replace lost ignition keys to a 1984 Monte Carlo?
you will have to replace the complete ignition switch with a new one.
2004 Monte Carlo Oil Pressure Switch Location?
where is the oil pressure switch located on a 2004 monte carlo
What do you need to replace to make the turn signals and hazard flashers to work in a 1997 Monte Carlo?
Probably turn signal flasher
Where is the hazard switch on a 1995 Chevy Monte Carlo?
Top of the steering column, it pushes down and pops back up on the 2nd try.
How do you replace the ball joints on a 1998 Monte Carlo Z34?
How do you replace the ball joints on a 1998 Monte Carlo Z34??
How do i replace the purge valve on a 1997 Chevy Monte Carlo?
How do i replace the purge valve on a 1999 Chevy Monte Carlo
How do you replace an ignition switch on a 2001 Monte Carlo ss 3.8?
Begin by removing the retaining ring at the top of your 2001 Chevrolet Monte Carlo ignition switch. The ignition switch barrel will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install your new ignition switch.
Where is hazard lasher on 2002 Monte Carlo?
on the dash above the radio
