Want this question answered?
twist and pull pig tail, you need to pull the pig tail out of the fixture from behind the bumper, then install a new #57 bulb and push and turn the pigtail back into the fixture.
I need to replace the odometer light on 1998 Mercedes ML 320.
How do you replace 2001 Mercedes c320 front marker light
The tail light lens on a 1989 Chevy Celebrity is part of the tail light fixture and cannot be conveniently removed. If you want to change a light bulb you have to remove the tail light fixture from the car. To remove the tail light fixture: 1. In the trunk next to the quarter panel are three nuts, remove the center nut. It should be in the center of the tail light fixture. 2. Pull the tail light fixture so that the stud comes out of the body, then pull outward to pull the tab out of the backup light fixture. 3. You can now take the appropriate socket out and replace the bulb. Reverse the steps to replace the light fixture.
how do you replace license pate light on 2006 pontia g6
how do you replace standing light bulb in the s430
Short to Ground Replace fuse with a test light Turn on lights test light will illuminate Check each fixture individually until test light goes out (current flow stops). This will indicate which fixture or wiring is bad. be sure to check parking, tail, and license plate lights also
Bring it to the dealership.
THRU THE TRUNKThe tail lights are replaced through the trunk. The license plate light is replaced by eitherundoing the two screws that flank the light,pulling the fixture down,removing the bulb socket,replace the bulb and reverse to reassembleORreach up from under the bumper to remove the bulb socket,replace the bulb and return the socket.If you don't know where the socket is, or don't have a flexible wrist, it's easier to undo the screws
Switching a light fixture requires the following steps. First, remove the old fixture. Second, you must disconnect the wiring. Third, a junction box must be installed. Finally, a new fixture must be installed. Detailed instructions can be found here: http://www.diynetwork.com/how-to/replace-a-bathroom-light-fixture/index.html
The light fixtures you choose as replacements will include detailed, illustrated instructions. Before you undertake the task, visit this site to read about the installation process and review the list of necessary tools: www.diynetwork.com/how-to/...a...light-fixture/index.html To replace the light fixture you need to follow these 7 steps (http://www.diynetwork.com/how-to/replace-a-bathroom-light-fixture/index.html). The tools you will need are a screwdriver, circuit tester, drywall saw, and wire strippers.
How do i change the 3rd brake light on a mercedes vito van.It is the brake light above the back door?