First you must remove all pressure from the system if it is charged. After doing so, proceed to remove the serpentine belt by using a wrench on the belt tensioner. Going in from underneath you must disconnect the plug connected to the pulley and then unscrew the bolts that connect the A/C hose to the compressor. Then you will need to use a socket wrench to undo four bolts that retain the body of the compressor to the engine block. With either pliers or a screw driver you must disconnect the lower radiator hose from the radiator and fold it out of the way. Now the compressor should drop down with a bit of fenagling. To install do reverse. NOTE: Do yourself a favor and try to purchase a new one with pulley and A/C clutch already installed, for if you do not the journey has only just begun.
you have the mechanic do it for you
To replace the AC compressor in a 1999 Grand Prix you must first remove the AC belt. Then disconnect the negative battery cable before removing the compressor bolts and connectors and removing compressor.
how do you replace a/c compressor for 1996 honda civic 1.6L
No.
This is not cost effective. It's quicker and cheaper to replace the compressor.
It located on the passenger side of the engine just behind the AC compressor. The service manual says you have to discharge and remove the AC compressor, however, i was able to loosen it and it gave me enough room to replace it.
how do you replace the AC compressor clutch on 2006 liberty
how to replace AC compressor on a 97 Buick park Ave
You will need to remove the ac compressor, alternator, and the bracket underneath them to access the bypass hose.You will need to remove the ac compressor, alternator, and the bracket underneath them to access the bypass hose.
New AC compressor for my 93 Ranger was $156.
my ac compressor is bad and i want to change it myself how can i do this
It is on the top of the ac compressor.It is on the top of the ac compressor.