Want this question answered?
The linkage is not connected to the door lock barrel. You will need to remove the inside door panel. Connect the linkage to the door lock barrel.
I assume you are referring to the lock barrel... Remove the inside trim panel from the door Reach inside the door and find the back of the door lock barrel, you will feel a metal clip on the opposite side of the barrel to the edge of the door (ie. on the windscreen side of the lock). Simply pull the clip towards the windscreen until it comes off (you will have to pull fairly hard), then you can withdraw the lock from the outside of the car. To put it back, slip the lock back through the door from outside, then slide the spring clip back to hold the barrel in place.
how do you replace rear door lock assembly on 92 pONTIAC tRANSPORT
Type your answer here... How to Replace a Lock Actuator | eHow.com go to eHow.com and type in Replace Honda pilot door Lock Actuator replacement
pull off the door cover and squeeze you hand through the hole to the lock barrel and pull off the U shape metal clip (the barrel is loose) disconnect everything else and its out completely
how do I remove door lock 99 gmc savana
Push the spring and pull the cylinder out
my neighbour pulled the u clip off door lock barrel and does not know how to put the clip back on 1996 Hyundai excel sprint
It depends on the vehicle.
Remove the inside door panel. Remove the door lock linkage. Remove the door lock barrel retaining ring. Reverse the process to install the new door lock.
door mech fix c180
Disconnect the battery. Remove the door panel. unbolt the door lock motor, and remove the wiring plug. Replace the motor and put the panel back on.