main thing is after removing the clutch don't attempt to remove the pulley. Simply bend the guide tabs out of the way slip on the new belt and bend them back. The pulley is difficult if not impossible without damage. Good tip read elsewhere is to remove a spark plug and push in some rope to bind the piston enabling you to undo the clutch bolt. Simple job when you know how.
how do you change drive belt on a ltx 1040 cub cadet
You can replace the drive belt on cub cadet RZT 50 by first making sure that the engine of the vehicle is turned off. Then you can pop open the hood and remove the belt.
Dont know either
You won't. Once they twist once, it keeps happening. You'll need a new belt
You can replace the transmission belt, on a Cub Cadet 1042, by loosening the tensioner pulley. Once the tensioner pulley is loose the belt will easily come off.
The drive belt on a Cub Cadet LX1040 is adjusted by turning a small bolt on the side of the cutting deck. It loosens or tightens the belt depending on the direction it is turned.
what model and which belt? If it is a 1000 series you have a transmission drive belt and a deck belt. I you have a 2000 series or higher or a cub cadet with an IH logo then you only have one belt the deck belt and no drive belt you have a drive shaft. So the model of the tractor and what belt needs to be given before the correct answer can be given.Phil
how to change the drive belt
how to replace drive belt 2003 Toyota matrix
please let me see a diagram of this
A-sect V belt 1/2 by 78 part # 954-0461
It's right on the deck